AQL Sampling Plan Calculator for Your Shipment
Enter your lot size, inspection level, and AQL limits to calculate your sample size and accept/reject (Ac/Re) thresholds for pre-shipment inspection (FRI), based on the ISO 2859-1 (ANSI/ASQ Z1.4) international standard.
Parameter Settings
Enter a value between 2 and 900,000,000
Pro Tip
Inspection LevelLevel II is the most common standard in international consumer goods trade. If your product involves high-density precision electronics or medical equipment, it is recommended to upgrade to Level III。
Sample Size
Accept (Ac)
Reject (Re)
Sample Size
Accept (Ac)
Reject (Re)
Sample Size
Accept (Ac)
Reject (Re)
Judgment Summary Table
| Defect Type | AQL Standards | Sample Size | Accept (Ac) | Reject (Re) |
|---|---|---|---|---|
| Critical | 0 | -- | -- | -- |
| Major | 2.5 | -- | -- | -- |
| Minor | 4 | -- | -- | -- |
Based on ISO 2859-1 (Normal Inspection - Single Sampling)
AQL 2.5 vs 4.0
Understand why Major defects often use AQL 2.5 and Minor defects use AQL 4.0.
Ac / Re
Learn how acceptance and rejection numbers drive the inspection decision.
Defect classes
Classify Critical, Major, and Minor defects before choosing AQL limits.
Sample Size & Code Letters
Find the code letter for your lot size and inspection level, then read off the sample size.
AQL Sampling Inspection Guide
From table lookup to sampling and the accept/reject decision — AQL inspection end to end.
Ready to launch quality control?
Book Professional Inspection Services Now →
* Our experts will provide customized solutions and precise quotes within 1 hour
How to Read the Tables
The tables below are the ISO 2859-1 (ANSI/ASQ Z1.4) single-sampling tables used by this calculator. You can look up plans manually or use the calculator above for instant results.
Lookup Steps
- 1. Find the code letter from your lot size and inspection level in Table A.
- 2. Find the sample size n corresponding to that code letter.
- 3. Find the acceptance number (Ac) and rejection number (Re) for your code letter and agreed AQL (resolved by arrow rules).
- 4. Decision: If defective units ≤ Ac, accept the lot; if ≥ Re, reject the lot. There is no grey zone in between (Re = Ac + 1).
- 5. If the sample size is ≥ the lot size, inspect 100% instead.
Worked Examples (General Inspection Level II)
3,000 men's shirts, Inspection Level II: Lot size 3,000 falls in the 1,201–3,200 range, code letter K, sample size 125. At AQL 2.5: accept 7 / reject 8; at AQL 4.0: accept 10 / reject 11; at AQL 1.5: accept 5 / reject 6.
5,000 pairs of trousers, Inspection Level II: Lot size 5,000 falls in the 3,201–10,000 range, code letter L, sample size 200. At AQL 2.5: accept 10 / reject 11; at AQL 4.0: accept 14 / reject 15.
Table A: Sample Size Code Letters (ISO 2859-1 Table I)
| Lot Size | S-1 | S-2 | S-3 | S-4 | I | II | III |
|---|---|---|---|---|---|---|---|
| 1–8 | A | A | A | A | A | A | B |
| 9–15 | A | A | A | A | A | B | C |
| 16–25 | A | A | B | B | B | C | D |
| 26–50 | A | B | B | C | C | D | E |
| 51–90 | B | B | C | C | C | E | F |
| 91–150 | B | B | C | D | D | F | G |
| 151–280 | B | C | D | E | E | G | H |
| 281–500 | B | C | D | E | F | H | J |
| 501–1200 | B | C | E | F | G | J | K |
| 1201–3200 | B | D | E | G | H | K | L |
| 3201–10000 | C | D | F | G | J | L | M |
| 10001–35000 | C | D | F | H | K | M | N |
| 35001–150000 | C | E | G | J | L | N | P |
| 150001–500000 | D | E | G | J | M | P | Q |
| 500001–99999999 | D | E | H | K | N | Q | R |
Table B: Single Sampling Plans for Normal Inspection (ISO 2859-1 Table II-A, AQL 1.0–6.5)
| Code Letter | AQL 1.0 | AQL 1.5 | AQL 2.5 | AQL 4.0 | AQL 6.5 |
|---|---|---|---|---|---|
| A | 13 / 0 / 1 * | 8 / 0 / 1 * | 5 / 0 / 1 * | 3 / 0 / 1 * | 2 / 0 / 1 |
| B | 13 / 0 / 1 * | 8 / 0 / 1 * | 5 / 0 / 1 * | 3 / 0 / 1 | 2 / 0 / 1 * |
| C | 13 / 0 / 1 * | 8 / 0 / 1 * | 5 / 0 / 1 | 3 / 0 / 1 * | 8 / 1 / 2 * |
| D | 13 / 0 / 1 * | 8 / 0 / 1 | 5 / 0 / 1 * | 13 / 1 / 2 * | 8 / 1 / 2 |
| E | 13 / 0 / 1 | 8 / 0 / 1 * | 20 / 1 / 2 * | 13 / 1 / 2 | 13 / 2 / 3 |
| F | 13 / 0 / 1 * | 32 / 1 / 2 * | 20 / 1 / 2 | 20 / 2 / 3 | 20 / 3 / 4 |
| G | 50 / 1 / 2 * | 32 / 1 / 2 | 32 / 2 / 3 | 32 / 3 / 4 | 32 / 5 / 6 |
| H | 50 / 1 / 2 | 50 / 2 / 3 | 50 / 3 / 4 | 50 / 5 / 6 | 50 / 7 / 8 |
| J | 80 / 2 / 3 | 80 / 3 / 4 | 80 / 5 / 6 | 80 / 7 / 8 | 80 / 10 / 11 |
| K | 125 / 3 / 4 | 125 / 5 / 6 | 125 / 7 / 8 | 125 / 10 / 11 | 125 / 14 / 15 |
| L | 200 / 5 / 6 | 200 / 7 / 8 | 200 / 10 / 11 | 200 / 14 / 15 | 200 / 21 / 22 |
| M | 315 / 7 / 8 | 315 / 10 / 11 | 315 / 14 / 15 | 315 / 21 / 22 | 200 / 21 / 22 * |
| N | 500 / 10 / 11 | 500 / 14 / 15 | 500 / 21 / 22 | 315 / 21 / 22 * | 200 / 21 / 22 * |
| P | 800 / 14 / 15 | 800 / 21 / 22 | 500 / 21 / 22 * | 315 / 21 / 22 * | 200 / 21 / 22 * |
| Q | 1250 / 21 / 22 | 800 / 21 / 22 * | 500 / 21 / 22 * | 315 / 21 / 22 * | 200 / 21 / 22 * |
| R | 1250 / 21 / 22 * | 800 / 21 / 22 * | 500 / 21 / 22 * | 315 / 21 / 22 * | 200 / 21 / 22 * |
* Asterisk indicates plans resolved by the standard arrow rule taking another code letter's plan; if the sample size is ≥ the lot size, inspect 100% instead.
For full standard details and practical guidelines, read the complete guides: Sample Size & Code Letters·AQL Sampling Inspection Guide
Frequently Asked Questions About AQL Sampling
Understanding AQL
AQL (Acceptable Quality Limit) is a statistical measurement defined in ISO 2859-1 (ANSI/ASQ Z1.4). It represents the maximum percentage of defective units that can be considered acceptable during random sampling inspection. The lower the AQL value, the stricter the quality requirement. For example, AQL 1.0 means no more than 1% of the sampled units should be defective.